If your bipod attaches to your front sling swivel like most, then it has no impact whatsoever on your point of impact. The rifle weight will rest on your stock normally as though you were holding the forearm with your hand. A bipod may affect your cheek weld and how you position your eye behind the scope. With less expensive scopes (i.e. more parallax), this could affect your point of impact. Try to maintain the same cheek weld regardless of your shooting position for best accuracy.
If it is one of the el-cheapos that attach to the barrel, you bet it will affect the point of impact and you will have to re-zero or hold off accordingly.
That is normally an accurate rifle and worth using a bi-pod for long range accuracy. Best of luck!
Take care to note if the front swivel is drilled completely through the stock and is butted up against the barrel. If so remove add lock-tite or glue and put it back into the stock far enough to hold but not touch your barrel. Alternatively you can simply file away the unacceptable potion of the swivel screw and reattach. This is a rare situation but if you are unlucky enough to encounter it the pressure of the bipod will act just like one directly affixed to the barrel.
If your bipod attaches to your front sling swivel like most, then it has no impact whatsoever on your point of impact. The rifle weight will rest on your stock normally as though you were holding the forearm with your hand. A bipod may affect your cheek weld and how you position your eye behind the scope. With less expensive scopes (i.e. more parallax), this could affect your point of impact. Try to maintain the same cheek weld regardless of your shooting position for best accuracy.
If it is one of the el-cheapos that attach to the barrel, you bet it will affect the point of impact and you will have to re-zero or hold off accordingly.
That is normally an accurate rifle and worth using a bi-pod for long range accuracy. Best of luck!
Take care to note if the front swivel is drilled completely through the stock and is butted up against the barrel. If so remove add lock-tite or glue and put it back into the stock far enough to hold but not touch your barrel. Alternatively you can simply file away the unacceptable potion of the swivel screw and reattach. This is a rare situation but if you are unlucky enough to encounter it the pressure of the bipod will act just like one directly affixed to the barrel.
Answers (5)
BTW, my rifle is a Savage 111 Trophy Hunter XP chambered in .30-06.
Attach the bipod, then shoot a target. Then you'll know! Don't know of any other way to ascertain the effect.
If your bipod attaches to your front sling swivel like most, then it has no impact whatsoever on your point of impact. The rifle weight will rest on your stock normally as though you were holding the forearm with your hand. A bipod may affect your cheek weld and how you position your eye behind the scope. With less expensive scopes (i.e. more parallax), this could affect your point of impact. Try to maintain the same cheek weld regardless of your shooting position for best accuracy.
If it is one of the el-cheapos that attach to the barrel, you bet it will affect the point of impact and you will have to re-zero or hold off accordingly.
That is normally an accurate rifle and worth using a bi-pod for long range accuracy. Best of luck!
I've had good luck with bipods made by Harris.
Take care to note if the front swivel is drilled completely through the stock and is butted up against the barrel. If so remove add lock-tite or glue and put it back into the stock far enough to hold but not touch your barrel. Alternatively you can simply file away the unacceptable potion of the swivel screw and reattach. This is a rare situation but if you are unlucky enough to encounter it the pressure of the bipod will act just like one directly affixed to the barrel.
Post an Answer
If your bipod attaches to your front sling swivel like most, then it has no impact whatsoever on your point of impact. The rifle weight will rest on your stock normally as though you were holding the forearm with your hand. A bipod may affect your cheek weld and how you position your eye behind the scope. With less expensive scopes (i.e. more parallax), this could affect your point of impact. Try to maintain the same cheek weld regardless of your shooting position for best accuracy.
If it is one of the el-cheapos that attach to the barrel, you bet it will affect the point of impact and you will have to re-zero or hold off accordingly.
That is normally an accurate rifle and worth using a bi-pod for long range accuracy. Best of luck!
Attach the bipod, then shoot a target. Then you'll know! Don't know of any other way to ascertain the effect.
BTW, my rifle is a Savage 111 Trophy Hunter XP chambered in .30-06.
I've had good luck with bipods made by Harris.
Take care to note if the front swivel is drilled completely through the stock and is butted up against the barrel. If so remove add lock-tite or glue and put it back into the stock far enough to hold but not touch your barrel. Alternatively you can simply file away the unacceptable potion of the swivel screw and reattach. This is a rare situation but if you are unlucky enough to encounter it the pressure of the bipod will act just like one directly affixed to the barrel.
Post an Answer