Cons-expensive, adds weight to back of the arrow which hurts tuning and FOC, they weaken arrow spine, they only have a 2 degree offset which with short vanes can make it harder to get broadheads to fly well.
stick with fletchings that have a helical and are glued to the shafts. i like the arizona ez fletch mini. 3 degree helical idiot proof to use(i'm proof) just put in your vanes run a line of glue down fletching, put arrow knock in knock holder then close and put cap on. let sit for about 10 min then take arrow out. i can do about a dozen in about 2 hr of watching tv.
my arrows fly great and lately with the broadheads i use(fixed blades), i only make sure that the spin true and i don't have to worry about how they fly. the first few time i set up arrows i would alway practice and see how they shot compared t my field points, but all i did was waste blades and destroy the first arrows that i shot with a field heads.
Mike0174- but how does it weaken arrow spine? My understanding it would make for a more ridged shaft?? Same arrow shaft cut shorter would make the arrow more ridged?? By no means am I promoting this product, but just from my own thoughts, I developed my own theory. I love to get feedback over things I did not think to consider.
when you add weight to ether end of a shaft you weaken the spine.You are right. i was thinking of not recutting arrows and just using the insert with the shafts at the length they all ready are. you would be right if you cut 2-3in off to compensate for the length of the nufletch it would most likely strengthen the spine,
Reading this discussion I thought I would chime in...I purchased the NuFletch because I really did not understand the product and from the shops I talked with I figured out they did not have any experience with the product...but they were quick to tell me it would not work. I ordered the product on line because I wanted to check it out. I followed the directions, retuned after the installation, it tuned quickly and I have never looked back. I’m definitely shooting tighter groups and fletching is no longer a problem for me. I would not worry about the spine, FOC, or weight… just tune it and shoot it...that’s exactly what I did.
Reading this discussion I thought I would chime in...I purchased the NuFletch because I really did not understand the product and from the shops I talked with I figured out they did not have any experience with the product...but they were quick to tell me it would not work. I ordered the product on line because I wanted to check it out. I followed the directions, retuned after the installation, it tuned quickly and I have never looked back. I’m definitely shooting tighter groups and fletching is no longer a problem for me. I would not worry about the spine, FOC, or weight… just tune it and shoot it...that’s exactly what I did.
I have not used them but I do like the new type of quick fletches that are out. Just boil water and dip, thats it! and they are easy to line up with your broadheads.
Reading this discussion I thought I would chime in...I purchased the NuFletch because I really did not understand the product and from the shops I talked with I figured out they did not have any experience with the product...but they were quick to tell me it would not work. I ordered the product on line because I wanted to check it out. I followed the directions, retuned after the installation, it tuned quickly and I have never looked back. I’m definitely shooting tighter groups and fletching is no longer a problem for me. I would not worry about the spine, FOC, or weight… just tune it and shoot it...that’s exactly what I did.
Cons-expensive, adds weight to back of the arrow which hurts tuning and FOC, they weaken arrow spine, they only have a 2 degree offset which with short vanes can make it harder to get broadheads to fly well.
stick with fletchings that have a helical and are glued to the shafts. i like the arizona ez fletch mini. 3 degree helical idiot proof to use(i'm proof) just put in your vanes run a line of glue down fletching, put arrow knock in knock holder then close and put cap on. let sit for about 10 min then take arrow out. i can do about a dozen in about 2 hr of watching tv.
my arrows fly great and lately with the broadheads i use(fixed blades), i only make sure that the spin true and i don't have to worry about how they fly. the first few time i set up arrows i would alway practice and see how they shot compared t my field points, but all i did was waste blades and destroy the first arrows that i shot with a field heads.
Mike0174- but how does it weaken arrow spine? My understanding it would make for a more ridged shaft?? Same arrow shaft cut shorter would make the arrow more ridged?? By no means am I promoting this product, but just from my own thoughts, I developed my own theory. I love to get feedback over things I did not think to consider.
when you add weight to ether end of a shaft you weaken the spine.You are right. i was thinking of not recutting arrows and just using the insert with the shafts at the length they all ready are. you would be right if you cut 2-3in off to compensate for the length of the nufletch it would most likely strengthen the spine,
Reading this discussion I thought I would chime in...I purchased the NuFletch because I really did not understand the product and from the shops I talked with I figured out they did not have any experience with the product...but they were quick to tell me it would not work. I ordered the product on line because I wanted to check it out. I followed the directions, retuned after the installation, it tuned quickly and I have never looked back. I’m definitely shooting tighter groups and fletching is no longer a problem for me. I would not worry about the spine, FOC, or weight… just tune it and shoot it...that’s exactly what I did.
I have not used them but I do like the new type of quick fletches that are out. Just boil water and dip, thats it! and they are easy to line up with your broadheads.
Answers (8)
Pros - Easy to change fletchings and fletchings are very consistent
Cons - Adds about $10 to the cost of each arrow
pros easy.
Cons-expensive, adds weight to back of the arrow which hurts tuning and FOC, they weaken arrow spine, they only have a 2 degree offset which with short vanes can make it harder to get broadheads to fly well.
stick with fletchings that have a helical and are glued to the shafts. i like the arizona ez fletch mini. 3 degree helical idiot proof to use(i'm proof) just put in your vanes run a line of glue down fletching, put arrow knock in knock holder then close and put cap on. let sit for about 10 min then take arrow out. i can do about a dozen in about 2 hr of watching tv.
my arrows fly great and lately with the broadheads i use(fixed blades), i only make sure that the spin true and i don't have to worry about how they fly. the first few time i set up arrows i would alway practice and see how they shot compared t my field points, but all i did was waste blades and destroy the first arrows that i shot with a field heads.
Mike0174- but how does it weaken arrow spine? My understanding it would make for a more ridged shaft?? Same arrow shaft cut shorter would make the arrow more ridged?? By no means am I promoting this product, but just from my own thoughts, I developed my own theory. I love to get feedback over things I did not think to consider.
Oops, my apology! Typo on your username... Mike0714
when you add weight to ether end of a shaft you weaken the spine.You are right. i was thinking of not recutting arrows and just using the insert with the shafts at the length they all ready are. you would be right if you cut 2-3in off to compensate for the length of the nufletch it would most likely strengthen the spine,
Reading this discussion I thought I would chime in...I purchased the NuFletch because I really did not understand the product and from the shops I talked with I figured out they did not have any experience with the product...but they were quick to tell me it would not work. I ordered the product on line because I wanted to check it out. I followed the directions, retuned after the installation, it tuned quickly and I have never looked back. I’m definitely shooting tighter groups and fletching is no longer a problem for me. I would not worry about the spine, FOC, or weight… just tune it and shoot it...that’s exactly what I did.
Reading this discussion I thought I would chime in...I purchased the NuFletch because I really did not understand the product and from the shops I talked with I figured out they did not have any experience with the product...but they were quick to tell me it would not work. I ordered the product on line because I wanted to check it out. I followed the directions, retuned after the installation, it tuned quickly and I have never looked back. I’m definitely shooting tighter groups and fletching is no longer a problem for me. I would not worry about the spine, FOC, or weight… just tune it and shoot it...that’s exactly what I did.
I have not used them but I do like the new type of quick fletches that are out. Just boil water and dip, thats it! and they are easy to line up with your broadheads.
Post an Answer
Reading this discussion I thought I would chime in...I purchased the NuFletch because I really did not understand the product and from the shops I talked with I figured out they did not have any experience with the product...but they were quick to tell me it would not work. I ordered the product on line because I wanted to check it out. I followed the directions, retuned after the installation, it tuned quickly and I have never looked back. I’m definitely shooting tighter groups and fletching is no longer a problem for me. I would not worry about the spine, FOC, or weight… just tune it and shoot it...that’s exactly what I did.
Pros - Easy to change fletchings and fletchings are very consistent
Cons - Adds about $10 to the cost of each arrow
pros easy.
Cons-expensive, adds weight to back of the arrow which hurts tuning and FOC, they weaken arrow spine, they only have a 2 degree offset which with short vanes can make it harder to get broadheads to fly well.
stick with fletchings that have a helical and are glued to the shafts. i like the arizona ez fletch mini. 3 degree helical idiot proof to use(i'm proof) just put in your vanes run a line of glue down fletching, put arrow knock in knock holder then close and put cap on. let sit for about 10 min then take arrow out. i can do about a dozen in about 2 hr of watching tv.
my arrows fly great and lately with the broadheads i use(fixed blades), i only make sure that the spin true and i don't have to worry about how they fly. the first few time i set up arrows i would alway practice and see how they shot compared t my field points, but all i did was waste blades and destroy the first arrows that i shot with a field heads.
Mike0174- but how does it weaken arrow spine? My understanding it would make for a more ridged shaft?? Same arrow shaft cut shorter would make the arrow more ridged?? By no means am I promoting this product, but just from my own thoughts, I developed my own theory. I love to get feedback over things I did not think to consider.
Oops, my apology! Typo on your username... Mike0714
when you add weight to ether end of a shaft you weaken the spine.You are right. i was thinking of not recutting arrows and just using the insert with the shafts at the length they all ready are. you would be right if you cut 2-3in off to compensate for the length of the nufletch it would most likely strengthen the spine,
Reading this discussion I thought I would chime in...I purchased the NuFletch because I really did not understand the product and from the shops I talked with I figured out they did not have any experience with the product...but they were quick to tell me it would not work. I ordered the product on line because I wanted to check it out. I followed the directions, retuned after the installation, it tuned quickly and I have never looked back. I’m definitely shooting tighter groups and fletching is no longer a problem for me. I would not worry about the spine, FOC, or weight… just tune it and shoot it...that’s exactly what I did.
I have not used them but I do like the new type of quick fletches that are out. Just boil water and dip, thats it! and they are easy to line up with your broadheads.
Post an Answer