Rifles
I am likely going to acquire a .35 Remington in a Marlin 336 sometime soon. I've been rolling my own for a 14" Contender barrel for years but have no experience with this caliber in a rifle. Any reloading suggestions or words of wisdom to share? It will see active duty for whitetails and black bear at responsible distances, preferably with a 200 gr. bullet. Thanks much.
Buffalo Bore has a 220 grain load that's faster than any factory 200 grain load I've seen.
As Shane stated cant go wrong with Buffao Bore I have shot thier 45 colt load a and am very impressed.
I know a guy down south who has used the .35 and many other calibers in his Contender for years. He swears the .35 is the best of the bunch. I also know a fellow there who shoots the .35 in a M-336 and has for over 30 years. He is still happy with it. I knew a fellow who passed away a few years ago who used the .35 here in Wyoming. I think it was the only big game rifle he owned and he was successful with it on deer and elk for years. Unfortunately he got into a fight with his son who shot and killed the dad and then himself. I never knew if the .35 was involved. Great rifle/cartridge combo within its range limitations. Should be a fun one to load and shoot but those Buffalo Bores no doubt will stop about anything you encounter.
Reload .35 Rem ? You gain very little in any area when the stuff is used for hunting. Lots of guys around here hunt with the 336 and old model 8's chambered for this round. Factory loads will drop a 1000 lb moose where it stands. Just make sure where it's standing isn't in 4 feet of muck & keep your shots limited to 125 yards or so.
Great round and great rifle! Check out the Hornady soft tip ammo and bullets. These will work in a tube magazine. Otherwise, stick with flat or round nose bullets. Hornady and Sierra make 200 gr round nose. Speer makes flat nose, but not in 200 gr.
I reload for the 35 Remington, and my 2 favorite bullets are the Speer 180 gr FN and the Speer 220 gr FN. Try one of the medium burning powders. H-4895, IMR-4064, IMR-3031, and if you want to get close to Buffalo Bore velocity with the 220 gr Speer, try AA2520.
They are all good shooters in my 336's and make good deer and black bear loads out to 200 yards.
I have one and love it. I don't have any experiance reloading them, but I'll agree with MLH about the Hornady soft tip, I'm having a hard time finding any on the self though. These are great rifles, I love the marlin. I'm looking in the future to purchase the marlin 450 for hogs. Good luck, great choice in rifles in my opinion.
Update-picked up the Marlin over the weekend. Not having enough time to work up a handload I bought a box of Remington 200 grain round nose corelokts. It had see thru mounts, which I detest, so we replaced them with a good set of standard Weavers, and started to rough it in. After several 25 yarders to see where it was shooting, shots 4-6 nestled into 1 1/2" at 100 yards. Think we're really going to like the Marlin and the .35 Remington. Good hunting, be safe!
I have hunted a 35 in m336 for years, love the rifle, one of the best mountain guns ever in my opion. I have tried my hand at reloading, and got good results, but have had excellent results out of the 200 corelocks as well. As is the case with my 30-06 the reloads do shoot a little better, but for hunting accuracy the out of the box corelocks are hard to beat. In a hunting situation i can't shoot good enough to make the difference in the 1/2" groups with the reloads and the 3/4" groups with factory corelocks. Either way great caliber and gun.
Further update - in case you missed it on DEP's Marlin lever action blog, I carried the .35 during the first week of WV's general firearms season, taking a big doe with it. A finer deer driving weapon has not been made, a pleasure to carry and works very well on whitetails.
Post a Reply
Great round and great rifle! Check out the Hornady soft tip ammo and bullets. These will work in a tube magazine. Otherwise, stick with flat or round nose bullets. Hornady and Sierra make 200 gr round nose. Speer makes flat nose, but not in 200 gr.
Buffalo Bore has a 220 grain load that's faster than any factory 200 grain load I've seen.
As Shane stated cant go wrong with Buffao Bore I have shot thier 45 colt load a and am very impressed.
I know a guy down south who has used the .35 and many other calibers in his Contender for years. He swears the .35 is the best of the bunch. I also know a fellow there who shoots the .35 in a M-336 and has for over 30 years. He is still happy with it. I knew a fellow who passed away a few years ago who used the .35 here in Wyoming. I think it was the only big game rifle he owned and he was successful with it on deer and elk for years. Unfortunately he got into a fight with his son who shot and killed the dad and then himself. I never knew if the .35 was involved. Great rifle/cartridge combo within its range limitations. Should be a fun one to load and shoot but those Buffalo Bores no doubt will stop about anything you encounter.
Reload .35 Rem ? You gain very little in any area when the stuff is used for hunting. Lots of guys around here hunt with the 336 and old model 8's chambered for this round. Factory loads will drop a 1000 lb moose where it stands. Just make sure where it's standing isn't in 4 feet of muck & keep your shots limited to 125 yards or so.
I reload for the 35 Remington, and my 2 favorite bullets are the Speer 180 gr FN and the Speer 220 gr FN. Try one of the medium burning powders. H-4895, IMR-4064, IMR-3031, and if you want to get close to Buffalo Bore velocity with the 220 gr Speer, try AA2520.
They are all good shooters in my 336's and make good deer and black bear loads out to 200 yards.
I have one and love it. I don't have any experiance reloading them, but I'll agree with MLH about the Hornady soft tip, I'm having a hard time finding any on the self though. These are great rifles, I love the marlin. I'm looking in the future to purchase the marlin 450 for hogs. Good luck, great choice in rifles in my opinion.
Further update - in case you missed it on DEP's Marlin lever action blog, I carried the .35 during the first week of WV's general firearms season, taking a big doe with it. A finer deer driving weapon has not been made, a pleasure to carry and works very well on whitetails.
Update-picked up the Marlin over the weekend. Not having enough time to work up a handload I bought a box of Remington 200 grain round nose corelokts. It had see thru mounts, which I detest, so we replaced them with a good set of standard Weavers, and started to rough it in. After several 25 yarders to see where it was shooting, shots 4-6 nestled into 1 1/2" at 100 yards. Think we're really going to like the Marlin and the .35 Remington. Good hunting, be safe!
I have hunted a 35 in m336 for years, love the rifle, one of the best mountain guns ever in my opion. I have tried my hand at reloading, and got good results, but have had excellent results out of the 200 corelocks as well. As is the case with my 30-06 the reloads do shoot a little better, but for hunting accuracy the out of the box corelocks are hard to beat. In a hunting situation i can't shoot good enough to make the difference in the 1/2" groups with the reloads and the 3/4" groups with factory corelocks. Either way great caliber and gun.
Post a Reply