Q:Help!! I just inherited my fathers Remington 1100 12 gauge built in 1972. I used to shoot a lot of skeet and would like to change out the barrel to a 28 gauge barrel? Will I need a different forearm ? And is there any other concerns with doing this? I don't want to creat any issues with the gun of course.. Thanks and I'll wait to hear your responses Dennis2at8
Q:When cleaning my trap gun (over/under), what is the proper order of operations? I have always ran the wire brush up and down the barrel of the guns, then used cleaning patches until they come out clean. Reason I'm asking is it's a new gun and I want to make sure I always do it the right way.
Q:After another season of slinging slugs with a smooth bore shotgun with a bead sight, I have decided the bead is not the best choice for my shooting abalities, and I am going to work on building a slug gun before next december. I has a remington 887 pump. Love the gun but I cant dial slugs into where I want them to go. They get close but not quite. In the closet sits a Winchester 1300 all purpose field pump gun with a 26" barrel. Drilled and tapped for a scope. I think I can get a slug barrel from Winchester or a Rifled choke tube. Remington wants almost $300 for a slug barrel for the 887. I was wanting to put a red dot on the 1300 but I dont know what kind of scope base and rings to get. It has two holes drilled into the top of the receiver and a little grove endendted in the top of it like the mount would sit down inside it. Anybody know what kind of mount I need to get this project rolling?