By David E. Petzal

Berthold is the name of an R-84 model Blaser .30/06 who came to the United States in the early 1990s, and was bought in Las Vegas after a SHOT Show. His new owner gave Berthold a home because of the way the rifle could group—three shots touching with ammo it liked—and its light weight.

Berthold became a go-to rifle. He went to Anticosti Island, and northern Quebec, and Alaska, and even Africa, and killed everything at which he was pointed. But over the years, his accuracy deteriorated to the point where he was lucky to print a 2-inch group.

[ Read Full Post ]

By David E. Petzal and Philip Bourjaily

Between 1970 and about 1990, I was a dedicated collector of fine, wood-stocked hunting rifles. I didn’t have a lot of them, but what I did have was choice, and among the very best were four that were made by a North Carolina artist (now retired) named Joe Balickie. Joe was so thin that when he took a shower he had to hold a coat hanger in his teeth to keep from going down the drain, and his rifles were equally skinny—not an extra ounce of walnut or steel anywhere. He always came up with spectacular wood, and his work was always original—no two Balickie rifles looked alike.

But in 1978 I bought my first synthetic-stocked rifle and gradually acquired more plastic as the wood-stocked guns went on down the road. But I always wondered what it would be like should I see one again. This past weekend at the East Coast Fine Arms Show in Old Greenwich, CT, I found out. I was running a rheumy eye down a rack of rifles being offered by Amoskeag Auctions, when I spotted a dark-honey-blond stock that could have only belonged to a .270 Joe Balickie built for me in 1985 or so. And... [ Read Full Post ]

By David E. Petzal and Philip Bourjaily

My thanks to Tom McIntyre for this one.

In the beginning was the .357 Magnum, and it was good, and then the .44 Magnum, which was much better, and made Clint Eastwood famous and Elmer Keith happy. Eventually, though, rumblings of discontent were heard throughout the land, and there followed the .454 Casull, and the .475 Linebaugh, and the .480 Ruger, and the .460 and .500 S&W, and hand surgeons everywhere rejoiced. But in Switzerland, a gentleman named Zeliska felt the need for something bigger, and so he went, money in hand (lots of money) to the firm of K. Pfeifer Waffen in Feldkirch, Austria and Herr Pfeifer did him proud.


The Pfeifer single-action revolver is chambered for the .600 Nitro Express cartridge. This round, which dates from the early 20th century, is an elephant whomper so extreme that very few rifles have been made for it. The .600 fires a 900-grain bullet at 1,950 fps, produces 3 1/2 tons of muzzle energy, and is three times more powerful than a .500 S&W magnum.

The Pfeifer revolver weighs 13.3 pounds, is just under 22 inches long, has a ported 13-inch... [ Read Full Post ]

By Philip Bourjaily

For years, every time I talked to any shotshell maker, I put in my plug for small-gauge steel loads. They would tell me it was impossible to make a wad thick enough to protect barrels and still hold a meaningful amount of shot. But, they were lying to me because as of now we have steel 28 and .410 loads. For 2009 Winchester announces 28 and .410 steel loads in 6 and 7 shot (roughly equivalent to 7 1/ 2 and 8 1/ 2 lead).

The 28 gauge loads contain 5/8 ounces of shot; the .410s have a 3/8-ounce payload. In terms of pellet count, 5/8 ounce of steel 6 shot equals 196 pellets; 5/8 ounce of 7s contains 249. In the .410, 3/8 ounce of 6 and 7 shot works out to a mere 117 or 149 pellets, respectively.

Granted, both should work only within extreme limitations on small gamebirds and clays. That said, I would love to go rail hunting with a .410 and 3/ 8 ounce of shot. The flight of a rail is usually so short that if you wait long enough not to blow it up with a 12 or 20, it lands before you ever get a... [ Read Full Post ]

By David E. Petzal and Philip Bourjaily

Savage Arms, which gave the shooting industry the leaping fantods when it introduced the Accu-Trigger, has just announced the Accu-Stock, which is just as radical. In stocks, as in other areas, the more rigid the better, and there are a couple of ways to achieve this. The first is used by High Tech, McMillan, and New Ultra Light Arms, who employ Kevlar and graphite, or reinforced fiberglass, to create a stiff stock. The materials themselves, when fused together, are more rigid than a rifle barrel, but such stocks are made largely by hand and are expensive.

The second approach is to use something limper, like polymer (which can be made fast and cheap) and strengthen the stock with an aluminum spine. The Accu-Stock is polymer, reinforced with an aluminum spine that runs from the action all the way down for fore-end. But there is more: Savage employs a wedge bolt to push the recoil lug back into the aluminum spine. This is not a new idea; Ruger has been doing it for decades but with a bedding screw that pulls down and back at a 45-degree angle. In addition, the Accu-Stock’s bedding cradle squeezes the action from all sides, fusing (or so... [ Read Full Post ]

By Philip Bourjaily

This clip comes from “Time Warp,” a Discovery Channel show that applies slow-motion photography to cool stuff, in this case, shooting clay targets or “skeets” as the voice-over guy insists on calling them.

Mostly, this is just fun to watch – especially the part where they shoot balloons. What was interesting to me from a technical standpoint was the slow-motion photography of USA Shooting’s Sean McClelland absorbing recoil, especially compared to co-host Jeff doing the same. McClelland holds the butt quite low in his shoulder pocket, and he leans into the shot. As a result, you see the gun move straight backward; the barrels hardly come up at all and McClelland’s head scarcely moves. He’s unfazed by recoil and ready for a followup. When Jeff, a novice, tries a shot, you can see the gun jump up, knocking his face off the stock. His second shot moves him a step backward.

If nothing else, the clip shows how important it is teach new shooters to lean forward with their nose over their toes when they shoot. By the way, if you want to feel Jeff’s pain and experience... [ Read Full Post ]